BootsnAll Travel Network



Mar 9-15: Mui Ne

travel-3.jpg

Pleasant surprise -the trip was to be 4 hours and guess what – the bus type was a sleeper bus.  Everyone had their own “bed” for the trip.  Vietnam has this sleeper bus figured out unlike Malaysia and Thailand where the seats go back like a plane – not very comfortable like these Vietnam overnight buses.

travel-2.jpgtravel-1.jpg

The southern coast of Vietnam reminds me of california coast at times.

coastline-1.jpgcoastline-2.jpgcoastline-3.jpg

Mui Ne (moo-ey- nay)– Josh writing:  Lucky for us the bus we were riding in was a sleeper bus. We didn’t pay for a sleeper bus, but oh well, who is going to complain? When we first got to Mui Ne, it was hot, hotter than Nha Trang, even in the shade. We sat for an hour or so while Mom and Dad went to look for a hotel. They found a good one, and yet cheap for its quality. The hotel was right on the beach and it had good A/C and a clean bathroom (the 2 most important things in Asia). First thing we did was go for a swim (obviously). Then Dad and I went to talk to the kite surfing shops/schools about lessons. They were expensive, but it was definitely worth it.  So the next day was  the kiting class. One thing I’ve learned from that (other than how to kite board) is that Mother Nature always wins. The wind is so strong! Reason is, I was “tea bagged” by the water! If u like tea, that may make sense. What I’m saying is that my kite lifted me out of the water and flung me back into it………..5 times. WAS NOT very fun. But the rest of the class went well. I finally got up on my board, but my Dad didn’t, but I had one more lesson (hour) than he did. The beach is good, the road isn’t too busy and there are plenty of restaurants. I thought that Mui Nie was awesome.

Tim Writing:  as a beach resort, this was the best!  The beach went for miles like a california coastline.  You then had the resorts or hotels, then the road, then the restaurants.  You also were not hassled by touts constantly to buy things.  This coastline is known for its kiteboarding and windsurfing. There was also an internationally known golf course (including night golfing)- very tempting for me, but in watching everyone out there having fun on the water, Josh and I decided to take  kiteboarding lessons – a beginner course was 5 hours.  To summarize – Josh did get up and had about 3 runs over 300 meters long (he did have an extra hour); I, well, did not get up on the board – but with an extra hour I probably would have.  I  think we are hooked to continue back in the US.  Josh’s instructor and myself were psyched that he was able to get up and ride.  This area is known to be one of the hardest in the world to learn on due to the waves and wind – we were training one day in 25 knot wind – no wonder I did not get up on the board.  We were here 7 days and thoroughly enjoyed the time – except the kids had to do homework everyday.  Outside of beach and surf and pool (mainly the girls) we did rent motorbikes and take a tour of the countryside to see white and red sand dunes (and to slide down them).  The road ran along the coastline – just gorgeous.  We were sad we had to leave to head to Saigon (Ho Chi MInh City) and soon out of Vietnam.  – below is our hotel – $40 for room with AC and attached bathroom and pool at beaches edge.munei-1.jpgmunei-2.jpg

Beach views north and south munei-3.jpgmunei-4.jpg

The kiteboarding school Josh and Tim took lessons fromkiteboarding-1a.jpg

1st hour – kiteboard set up and safety; 2nd hour – flying trainer kite then main kite left and right handed; kite-1.jpgkite-2.jpgkite-4.jpg3rd Hour – body dragging in water flying the kite, learning how to relaunch if it crashes when in water

kite-3.jpg

4th hour – body dragging with board and flying kite

kite-5.jpg

5th hour – if you get to this part in that amount of time – land training on getting up on board, then trying it over and over in the water – Here is Josh actually getting up – only 6 hours in the heavy winds and wavy sea – actually a very good timeframe considering the conditions.  Real proud of him.

kite-6.jpg

Josh and Tim with their instructors – English guy (the owner) and Irish guy.  Great Instructors. 

kite-7.jpg

Rented motorbikes for a half day to go to see sand dunes.  Got lost in backcountry.  Here is our gas station!!

sand-1.jpgsand-2.jpgsand-5.jpgsand-3.jpgsand-4.jpg

Out of context picture = these were the shoes Josh had a cobbler make for him in Hoi Ann.

shoes.jpg

We usually don’t eat hot dogs when in the states, but Josh was dying to eat one when he found out there was a restaurant that actually made them.  Eat your heart out Josh – over 12 inches long

sights-21.jpg

These next pictures are for Papa Campell or other old car enthusiasts – Ford Farlane?, Mustang Convertable, Mustang Hatchback – if only they knew how much money they have in that lot

sights-53.jpg

sights-14.jpg

French Restaurant – with all these old side car bikes and car – French Restaurant with Spanish music playing with Zebra skin on the wall -?? French, Spanish, African mix ??

sights-33.jpg

sights-42.jpg



Tags:

40,562 responses to “Mar 9-15: Mui Ne”

  1. You made some good points there. I looked on the web for more information about the issue and found most
    people will go along with your views on this
    website.

    Look at my web blog: prozenith reviews

  2. Samuelnag says:

    diagnostico de vibraciones
    Sistemas de balanceo: clave para el funcionamiento fluido y efectivo de las maquinarias.

    En el entorno de la innovacion moderna, donde la eficiencia y la seguridad del dispositivo son de maxima importancia, los equipos de calibracion juegan un rol fundamental. Estos dispositivos dedicados estan desarrollados para balancear y fijar partes moviles, ya sea en equipamiento industrial, transportes de transporte o incluso en aparatos de uso diario.

    Para los tecnicos en reparacion de aparatos y los tecnicos, trabajar con aparatos de ajuste es fundamental para asegurar el desempeno estable y estable de cualquier aparato giratorio. Gracias a estas alternativas tecnologicas avanzadas, es posible reducir considerablemente las movimientos, el ruido y la presion sobre los soportes, mejorando la longevidad de elementos valiosos.

    Asimismo trascendental es el tarea que desempenan los equipos de balanceo en la servicio al comprador. El apoyo tecnico y el reparacion permanente utilizando estos aparatos habilitan brindar prestaciones de alta excelencia, mejorando la satisfaccion de los compradores.

    Para los duenos de emprendimientos, la aporte en unidades de balanceo y sensores puede ser clave para incrementar la rendimiento y desempeno de sus sistemas. Esto es principalmente relevante para los emprendedores que manejan modestas y intermedias organizaciones, donde cada punto vale.

    Por otro lado, los sistemas de equilibrado tienen una vasta implementacion en el area de la fiabilidad y el supervision de estandar. Habilitan identificar posibles problemas, evitando mantenimientos caras y danos a los equipos. Mas aun, los datos obtenidos de estos aparatos pueden emplearse para mejorar sistemas y mejorar la reconocimiento en motores de investigacion.

    Las areas de implementacion de los equipos de ajuste cubren numerosas ramas, desde la fabricacion de bicicletas hasta el seguimiento ecologico. No interesa si se considera de grandes elaboraciones de fabrica o limitados establecimientos domesticos, los aparatos de calibracion son necesarios para garantizar un rendimiento productivo y sin presencia de interrupciones.

  3. Velocidad critica
    Aparatos de calibracion: fundamental para el funcionamiento fluido y productivo de las equipos.

    En el entorno de la avances moderna, donde la rendimiento y la fiabilidad del dispositivo son de gran significancia, los equipos de equilibrado juegan un tarea fundamental. Estos sistemas especializados estan concebidos para equilibrar y asegurar piezas dinamicas, ya sea en herramientas productiva, automoviles de desplazamiento o incluso en aparatos de uso diario.

    Para los expertos en reparacion de equipos y los tecnicos, operar con aparatos de calibracion es crucial para asegurar el desempeno suave y confiable de cualquier aparato dinamico. Gracias a estas opciones tecnologicas modernas, es posible minimizar notablemente las oscilaciones, el sonido y la presion sobre los cojinetes, extendiendo la vida util de elementos valiosos.

    Tambien importante es el papel que desempenan los equipos de equilibrado en la servicio al comprador. El asistencia tecnico y el mantenimiento continuo aplicando estos aparatos posibilitan dar prestaciones de optima nivel, elevando la satisfaccion de los usuarios.

    Para los responsables de negocios, la financiamiento en unidades de ajuste y medidores puede ser fundamental para optimizar la eficiencia y desempeno de sus equipos. Esto es particularmente relevante para los inversores que gestionan reducidas y intermedias emprendimientos, donde cada punto vale.

    Por otro lado, los dispositivos de balanceo tienen una gran uso en el campo de la fiabilidad y el gestion de calidad. Permiten localizar probables fallos, reduciendo mantenimientos caras y danos a los dispositivos. Incluso, los resultados recopilados de estos aparatos pueden emplearse para maximizar procesos y potenciar la presencia en buscadores de consulta.

    Las campos de utilizacion de los aparatos de balanceo cubren numerosas ramas, desde la manufactura de bicicletas hasta el seguimiento del medio ambiente. No afecta si se refiere de extensas fabricaciones de fabrica o modestos establecimientos hogarenos, los aparatos de calibracion son indispensables para garantizar un desempeno optimo y sin riesgo de fallos.

  4. Holgura mecanica
    Equipos de equilibrado: fundamental para el funcionamiento uniforme y productivo de las equipos.

    En el campo de la innovacion actual, donde la efectividad y la estabilidad del equipo son de maxima relevancia, los equipos de equilibrado tienen un tarea fundamental. Estos equipos adaptados estan disenados para balancear y estabilizar elementos dinamicas, ya sea en dispositivos industrial, transportes de traslado o incluso en electrodomesticos hogarenos.

    Para los tecnicos en mantenimiento de aparatos y los tecnicos, operar con dispositivos de calibracion es esencial para proteger el operacion estable y estable de cualquier aparato giratorio. Gracias a estas alternativas avanzadas sofisticadas, es posible reducir sustancialmente las oscilaciones, el zumbido y la tension sobre los rodamientos, aumentando la duracion de piezas caros.

    Igualmente significativo es el rol que desempenan los dispositivos de calibracion en la soporte al consumidor. El soporte tecnico y el conservacion constante utilizando estos aparatos habilitan dar soluciones de gran excelencia, incrementando la contento de los usuarios.

    Para los propietarios de empresas, la aporte en estaciones de calibracion y dispositivos puede ser esencial para aumentar la productividad y rendimiento de sus equipos. Esto es principalmente importante para los duenos de negocios que gestionan reducidas y intermedias negocios, donde cada detalle importa.

    Asimismo, los sistemas de calibracion tienen una extensa utilizacion en el ambito de la fiabilidad y el monitoreo de estandar. Habilitan identificar eventuales defectos, impidiendo mantenimientos onerosas y averias a los dispositivos. Ademas, los indicadores recopilados de estos aparatos pueden usarse para perfeccionar procedimientos y potenciar la exposicion en buscadores de investigacion.

    Las areas de uso de los sistemas de equilibrado abarcan numerosas ramas, desde la produccion de ciclos hasta el seguimiento del medio ambiente. No interesa si se considera de importantes producciones industriales o modestos establecimientos domesticos, los equipos de equilibrado son esenciales para garantizar un funcionamiento eficiente y libre de paradas.

Leave a Reply

Your email address will not be published. Required fields are marked *